Nordhavn 40
Built 1999–2011 by Pacific Seacraft (to 2003); Taiwan yard for MK II from 2004
About the Nordhavn 40
Researched from public sources for this model. Any individual boat may have been modified or repowered — confirm before relying on any figure.
- Built
- 1999–2011
- Builder
- Pacific Seacraft (to 2003); Taiwan yard for MK II from 2004
- Length
- 39.75 ft
- Waterline
- 35.42 ft
- Beam
- 14.5 ft
- Draft
- 4.75 ft
- Displacement
- 50,000 lb
- Hull / keel
- full displacement
- Propulsion
- inboard
- Fuel
- 920 gal
- Water
- 250 gal
- Holding
- 70 gal
- Bow thruster
- standard
- Stern thruster
- standard
Sources disagree on engines — left blank rather than guessed.
Ballasted (about 2,500 lb) full-displacement passagemaker. Dry-stack exhaust and keel cooling standard, so there is no raw-water engine cooling circuit or wet exhaust elbow to maintain; the dry stack and keel cooler need their own inspection. Bow and stern thrusters and a 27 hp Yanmar wing engine are listed features. Single 105 hp Lugger cruises 7-8 knots with about 2,500 nm range.
Known problems for this model
No well-sourced problem reports found yet.
Model sources (1)
Other Nordhavn models
- Nordhavn 35 Coastal Pilot 2001–2005
- Nordhavn 46 1989–2003
- Nordhavn 47 2003–2008
- Nordhavn 50 1996–2006
Researched from public sources. Spotted an error? The sources are listed above — tell us what they got wrong.